RAM 2500 Truck 4WD V8-5.9L VIN Z (1997)
Low Fuel Lamp/Indicator: Service and Repair
REMOVAL
1. Remove the instrument cluster.
Low Fuel Warning Circuit Connector
2. Remove the low fuel warning circuit from the circuit connector on the rear of the cluster housing.
3. The low fuel warning circuit is secured to the back of the cluster housing by two bulb holders. Remove the left turn signal bulb holder and one
cluster illumination bulb holder by turning them counterclockwise.
4. Pull the flexible printed circuit back away from the rear of the cluster housing.
5. Remove the low fuel warning circuit.
6. Reverse the removal procedures to install.
