RAM 2500 Truck 4WD V8-5.9L VIN Z (1997)
Fuel Pump Pickup Filter: Service and Repair
Fig. 2 Fuel Pump Module Components - Gas Powered Engines - Typical
NOTE: The in-tank, fuel pump inlet filter (strainer) is located on the bottom of fuel pump module (Fig. 2). The fuel pump module is located on top of
fuel tank.
REMOVAL
1. Remove fuel tank. Refer to Fuel Tank Removal/Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/installation.
3. Remove filter by carefully prying 2 lock tabs at bottom of module with 2 screwdrivers. Filter is snapped to module.
4. Clean bottom of pump module.
INSTALLATION
1. Snap new filter to bottom of module.
2. Install fuel pump module. Refer to Fuel Pump Module Removal/Installation.
3. Install fuel tank. Refer to Fuel Tank Removal/Installation.