RAM 2500 Truck 4WD V8-5.9L VIN Z (1997)
Fog/Driving Lamp Switch: Service and Repair
Overdrive Lockout Switch and Fog Lamp Switch Replacement
REMOVAL
1. Remove the cluster bezel.
Overdrive Lockout And Fog Lamp Switches Remove/Install
2. Remove the three screws that secure the switch bezel to the instrument panel.
3. Pull the switch bezel out from the instrument panel far enough to unplug the wire harness connector(s) from the rear of the switch(es).
4. Remove the switch and bezel unit from the instrument panel.
5. Release the retaining tabs and remove the switch(es) from the rear of the bezel.
6. Reverse the removal procedures to install.