RAM 2500 Truck 4WD V8-5.9L VIN Z (1997)
Wiper Module Remove/Install
8. Remove the bolts that secure the wiper module assembly to the cowl plenum panel.
Wiper Motor Connectors
9. Turn the wiper linkage module over and unplug the wire harness and ground tab connectors from the wiper motor.
10. Remove the wiper module assembly from the cowl plenum.
11. Reverse the removal procedures to install. Be certain that the washer nozzle hoses are correctly routed and installed in the retainers on the
underside of the cowl plenum cover/grille panel.