RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Antenna Mounting
9. Reach above the Powertrain Control Module (PCM) on the right side of the dash panel in the engine compartment to disengage the antenna coaxial
cable grommet from the hole in the dash panel.
10. Pull the antenna coaxial cable out of the passenger compartment and into the engine compartment through the hole in the dash panel.
Antenna Mast Remove/Install - Typical
11. Raise the sleeve on the antenna mast far enough to access and unscrew the antenna mast from the antenna body.
Antenna Cap Nut Remove/Install - Typical