RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Speaker: Service and Repair
A-Pillar Tweeter
REMOVAL
The A-pillar-mounted tweeters are used only with the optional Infinity premium speaker package.
1. Disconnect and isolate the battery negative cable.
2. If the vehicle is so equipped, remove the grab handle from the A-pillar.
3. Disengage the garnish moulding retainers from the A-pillar.
A-Pillar Tweeter Remove/Install
4. Pull the garnish moulding away from the A-pillar far enough to access and unplug the tweeter wire harness connector.
5. Remove the garnish moulding from the A-pillar.
6. Disengage the tweeter wire harness retainers from the heat stakes on the back of the A-pillar garnish moulding.
7. Unsnap the tweeter from the A-pillar garnish moulding mounting hole by pushing out on the tweeter from the inside of the moulding.
8. Reverse the removal procedures to install. Use a suitable tape or adhesive to secure the tweeter wire harness to the inside of the garnish moulding.
