RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Speaker: Service and Repair
Front Door
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the inside trim panel from the front door.
Front Door Speaker Remove/Install
3. Remove the screws that secure the speaker near the front of the front door inner panel.
4. Pull the speaker away from the inner door panel far enough to access and unplug the speaker wire harness connector.
5. Remove the speaker from the door.
6. Reverse the removal procedures to install. Tighten the speaker mounting screws to 4 N.m (35 in. lbs.).
