RAM 2500 Truck 4WD V8-59L VIN Z LDC (1998) Electronic Brake Control Module Repair
Controller Mounting Screws
4. Remove screws attaching CAB to the Hydraulic Control Unit (HCU).
5. Remove the CAB.
INSTALLATION
1. Place the CAB onto the HCU.
NOTE: Insure the CAB seal is in position before installation.
2. Install the mounting screws and tighten to 4 - 4.7 Nm (36 - 42 inch lbs.).
3. Connect the pump motor harness.
4. Connect the harnesses to the CAB and lock the connectors.
5. Connect battery.