RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Catalytic Converter: Testing and Inspection
INSPECTION
Look at the stainless steel body of the converter, inspect for bulging or other distortion that could be a result of overheating. If the converter has a heat
shield attached make sure it is not bent or loose.
WARNING: Unleaded fuel must be used to prevent blockage or contamination to the catalyst core.
If you suspect internal damage to the catalyst, tapping the bottom of the catalyst with a rubber mallet may indicate a damaged core.
CLEANING
Clean ends of pipes and muffler to assure a good seal at mating surfaces.