RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Daytime Running Lamp Control Unit: Service and Repair
REMOVAL
1. Release hood latch an open hood.
2. Disengage wire connector from DRLM.
3. Remove screws attaching DRLM to left front inner fender panel.
4. Separate DRLM from fender.
INSTALLATION
1. Position DRLM on fender.
2. Install screws attaching DRLM to left front inner fender panel.
Daytime Running Lamp Module (DRLM)
3. Engage wire connector to DRLM.
4. Close hood.
