RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Map Light Bulb: Service and Repair
Overhead Console Reading Lamp Bulb
REMOVAL
Overhead Console Reading Lamp Bulb Removal
1. Insert a flat blade screwdriver in slot at front of lens.
2. Rotate the screwdriver until lens snaps out of the housing.
3. Remove lens from housing.
4. Remove bulb from terminals.
INSTALLATION
1. Insert bulb into reading lamp terminals.
2. Replace lens by holding lens level and pushing rearward into housing.
3. Push lens up to snap into housing.
