RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Figure 5
11.
Place one spring clinch clip isolator p/n **52113142AA** onto the outboard side of the spring clinch clip (Figure 5) and one isolator on the
inboard side of the spring clinch clip.
Figure 6
12.
Using large adjustable pliers, close the spring clinch clip until the isolator contacts the leaf spring (Figure 6).
CAUTION:
DO NOT USE A HAMMER TO CLOSE THE SPRING CLINCH CLIP. DAMAGE TO THE ISOLATOR MAY RESULT.
13.
Use an appropriate pry bar to bend open the front spring clinch clip. If necessary, remove the existing spring clinch clip isolators.
14.
Perform Steps 5 through 12 to the front portion of the rear leaf spring assembly.
