RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Clutch Release Components Lubrication Points
10. Remove release lever and release bearing from clutch housing. Apply MOPAR high temperature bearing grease to bore of release bearing, release
lever contact surfaces and release lever pivot stud.
Input Shaft Lubrication Points-Typical
11. Apply light coat of MOPAR high temperature bearing grease to splines of transmission input shaft (or drive gear) and to release bearing slide
surface of the transmission front bearing retainer. Do not over lubricate shaft splines. This can result in grease contamination of disc.
