RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Pinion Rear Bearing Cup Installation
2. Install the pinion rear bearing cup with Installer D-146 for 216 FBI axles, or D-111 for 248 FBI axles, and Handle C-4171. Ensure cup is correctly
seated.
Pinion Front Bearing Cup Installation
3. Install the pinion front bearing cup with Installer D-144 for 216 FBI axles, or D-146 for 248 FBI axles, and Handle C-4171.
4. Install pinion front bearing, oil slinger. Apply a light coating of gear lubricant on the lip of pinion seal.
Pinion Seal Installation-216 FBI Axle
