RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Seals and Gaskets: Service and Repair
Front Axle - 216 or 248FBI
REMOVAL
1. Remove the axle shaft seal from the differential housing with a long drift or punch. Be careful not to damage housing.
2. Clean the inside perimeter of the differential housing with fine crocus cloth.
INSTALLATION
1. Apply a light film of oil to the inside lip of the new axle shaft seal.
Axle Seal Installation
2. Install the inner axle seal. It may be necessary to substitute Installer C-3716-A for Installer C-3972-A on 216 FBI axles.