RAM 2500 Truck 4WD V8-5.9L VIN Z LDC (1998)
Windshield Washer Spray Nozzle: Service and Repair
REMOVAL
1. Remove the cowl plenum cover/grille panel from the cowl top. See Wiper Motor in the Replacement for the procedures.
2. From the underside of the cowl plenum cover/grille panel, disconnect the washer hose from the nozzle fitting.
3. From the underside of the cowl plenum cover/grille panel, compress the retaining tabs of the washer nozzle and push the nozzle out through the
top of the panel.
4. Reverse the removal procedures to install.