RAM 2500 Van V8-318 5.2L VIN T Magnum CNG SFI (1997)
Marker Lamp Bulb: Service and Repair
Tail, Stop, Turn Signal, Sidemarker and Back-Up Lamp Bulbs
REMOVAL
1. Remove the screws attaching the lamp to the vehicle.
Bulb Socket Removal
2. Rotate the bulb socket 1/4 turn counterclockwise to remove it from the housing.
3. Pull the bulb straight out of the socket to remove it.
INSTALLATION
1. Press bulb into socket and position socket in housing.
2. Rotate the bulb socket 1/4 turn clock-wise to install in the housing.
3. Position the lamp on the vehicle and install screws.
