RAM 2500 Van V8-318 5.2L VIN T Magnum CNG SFI (1997)
Alignment: Service and Repair
GENERAL INFORMATION
The front wheel alignment angles should be set to preferred specifications. This will prevent abnormal tire tread wear. Before each alignment
reading the vehicle should be jounced (rear first, then front). Grasp each bumper at the center and jounce the vehicle up and down several times.
Always release the bumper in the down position.
NOTE: All damaged front suspension system components should be replaced. Do not attempt to straighten any bent component.
CAMBER AND CASTER
Camber and caster angle adjustments involve repositioning the upper suspension arm pivot bar. Alignment adjustments are accomplished by
changing the position of the pivot bar. Adjuster Set C-4581, or equivalent is used to adjust the camber and caster angles.
