RAM 2500 Van V8-318 5.2L VIN T Magnum CNG SFI (1997)
5. Remove pump attaching screws.
INSTALLATION
1. Install pump bracket to pump and tighten the bolts to 54 Nm (40 ft. lbs.).
2. Install the pump pulley.
3. Install pump assembly on engine block and tighten bolts to 41 Nm (30 ft. lbs.).
4. Connect hoses to pump and tighten fitting to 35 Nm (25 ft. lbs.).
5. Install serpentine belt.
6. Fill pump reservoir with power steering fluid only, and perform Pump Initial Operation.