RAM 2500 Van V8-318 5.2L VIN T Magnum CNG SFI (1997)
Wiper Control Module: Service and Repair
Intermittent Wipe Module Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the glove box bin.
Intermittent Wipe Module Remove/Install
3. Unplug the wire harness connector from the intermittent wipe module.
4. Disengage the intermittent wipe module snap-fit mounting slot from the blade of the mounting bracket.
5. Reverse the removal procedures to install.
