RAM 2500 Van V8-360 5.9L Magnum (1995)
Sliding Door Handle: Service and Repair
Exterior Door Handle
Sliding Cargo Door Handles
SLIDING CARGO DOOR OUTSIDE DOOR HANDLE REMOVAL
1. Remove the inside handle and the spacers.
2. Pull the outside handle shaft from the door latch and remove the handle, escutcheon and seal from the door.
INSTALLATION
1. Position the outside handle shaft seal and the escutcheon on the outside door panel.
2. Insert the outside handle shaft in the latch hole and seat the handle against the escutcheon.
3. Install the inside handle and the spacers. Verify that both spacers are installed.