Dodge Workshop Service and Repair Manuals

Valve: Specifications

All Specifications Given In Inches Unless Otherwise Noted.

Stem Diameter

Intake ................................................................................................................................................................................................  0.3720 - 0.3730 [09] 
Exhaust .............................................................................................................................................................................................  0.3710 - 0.3720 [09] 

Installed Height ..................................................................................................................................................................................................................   --
Valve Recess .......................................................................................................................................................................................................................  --
Maximum Tip Refinish ...................................................................................................................................................................................................  [08] 
Face Angle, degrees ......................................................................................................................................................................................   43 1/4 - 43  3/4
Margin [01]

Intake .........................................................................................................................................................................................................................  0.047
Exhaust ......................................................................................................................................................................................................................  0.047

Valve Clearance

Intake .........................................................................................................................................................................................................................   [06] 
Exhaust .......................................................................................................................................................................................................................  [06] 

Footnotes:

[06] - Hydraulic lash adjusters.
[08] - 

Valves may be ground to correct installed height unless they are equipped w/rotators. If valves are equipped w/rotators, do not grind stem tips.

[09] - 

Standard diameter. Valve should be replaced if wear exceeds 0.002 inch.