RAM 2500 Van V8-360 5.9L Magnum (1995)
EGR Control Solenoid: Initial Inspection and Diagnostic Overview
In the RUN or START position, the ignition switch connects circuit A1 from the fuse block to circuit A21. Circuit A1 connects to battery voltage and is
protected by fuse 7 in the Power Distribution Center (PDC).
Circuit A21 splices to supply battery voltage to the EVAP/Purge solenoid, Transmission Converter Clutch (TCC) solenoid, overdrive solenoid, data link
connector and provides an input to the PCM.
