RAM 2500 Van V8-360 5.9L Magnum (1995)
2. Push fuel tube into Quick-Connect fitting until the stop on the fuel tube rests against the back of the Quick-Connect fitting.
3. Push the retainer clip into the slot in the Quick-Connect fitting until it locks in place.
4. Bend the retainer clip tabs up into their locking position.
Two TAB Type Fittings
NOTE: Fuel injection quick connect fittings are not serviced separately. Do not attempt to repair damaged quick connect fittings or tubes. Replace
complete fuel tube/quick connect fitting assembly.
Fuel Line Quick Connect Fitting
Fuel Line Quick Connect Fitting
REMOVAL
1. Disconnect negative battery cable.
2. Perform fuel pressure release procedure.
3. Squeeze retainer tabs together and pull quick connect fitting off fuel tube nipple. The retainer will remain on fuel tube.
INSTALLATION
1. Using a clean lint free cloth, clean fuel tube nipple and retainer.
2. Using a clean motor oil, lightly lube nipple and retainer.
CAUTION: Never install quick connect fitting if retainer is damaged or missing.