dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Overdrive Solenoid, A/T|Description and Operation|Page 2532 > < Engine Controls - Flash Programming Failure Recovery|Page 2525

RAM 2500 Van V8-360 5.9L Magnum (1995)

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Overdrive Solenoid, A/T
  • Component Information
  • Description and Operation

Page 1
background image

Overdrive Solenoid: Description and Operation

CONSTRUCTION

The overdrive solenoid and TCC solenoid are molded together. They are only used on four-speed automatic transmissions. 

OPERATION

The Powertrain Control Module (PCM) operates the overdrive solenoid by providing a ground path on circuit T60. Circuit T6O connects to the
PCM cavity 55. Circuit A21 supplies battery voltage to the overdrive solenoid.

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Overdrive Solenoid, A/T
  • Component Information
  • Description and Operation

Overdrive Solenoid, A/T|Description and Operation|Page 2532 > < Engine Controls - Flash Programming Failure Recovery|Page 2525