RAM 2500 Van V8-5.2L CNG VIN T (1999)
Figure 3
6.
If necessary, remove the old spring tip liner (Figure 3).
7.
With the prybar still inserted between the leaves, install a new spring tip liner (see Parts Required section) onto the leaf.
Figure 4
8.
Firmly seat the spring tip liner onto the leaf. A C-Clamp can be used to compress the adjacent leaves together (Figure 4) which will seat the liner
retaining pin into the hole.
NOTE:
THE SPRING TIP LINER IS PROPERLY INSTALLED WHEN THE RETAINING PIN IS POINTING TOWARD THE PAVEMENT AND THE
WEAR PAD IS CONTACTING THE LEAF SPRING.
9.
Apply a small amount of lubricant p/n 05018626AA onto the tip liner wear pad.
10.
Repeat Steps 5 through 9 to remove and install all rear spring tip liners.