RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
2. Open the glass to a 90 degree angle from the side of the vehicle body.
3. Force the window glass slightly inward. Disengage the lower hinge half from the upper hinge half.
4. Remove the window glass.
5. Remove the upper hinge half and the weatherstrip seal from the window opening.
6. Remove the molding and the latch from the glass.
INSTALLATION
1. Install the molding. Attach the latch to the glass. Tighten the glass nut to 8 N.m (70 in. lbs.) torque.
2. Install the upper hinge half and the weatherstrip seal. Tighten the upper hinge half bolts and nuts. Tighten the upper hinge half screws.
3. Put the window glass at a 90 degree angle from the side of the body. Engage the hinge halves.Lower the window glass to the closed position.
4. Position the latch base on the inner panel. Install the latch base screws in the inner panel and tapping plate. Tighten the upper hinge half screws.
