RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Sliding Door Interior Trim Panel: Service and Repair
Latch Access Cover
LATCH ACCESS COVER
REMOVAL
1. Remove the door trim panel.
2. Remove the inside handle.
3. Remove the lock knob and grommet from the knob latch rod.
Fig. 8
4. Remove the latch cover screws from the door panel (Fig. 8).
5. Remove the cover from the door panel.
INSTALLATION
1. Position the latch cover on the door panel with the knob latch rod and the outside handle shaft inserted in the cover holes.
2. Install the cover screws in the door panel.
3. Install the inside handle.
4. Install the knob and grommet on the knob latch rod.
5. Install the inside trim panel.
