RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Fig. 6
3. Remove the three screws that secure the glove box hinge to the instrument panel lower glove box opening reinforcement (Fig. 6).
4. Remove the glove box from the instrument panel.
INSTALLATION
1. Position the glove box hinge to the instrument panel lower glove box opening reinforcement (Fig. 6).
2. Install and tighten the three screws that secure the glove box hinge to the instrument panel lower glove box opening reinforcement. Tighten the
screws to 3 N.m (30 in. lbs.).
3. Roll up the glove box into the instrument panel.
4. Reconnect the battery negative cable.