dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seals and Gaskets, Engine > < Additional Information|Page 1651
Page 4
background image

(16) Install the fuel lines.
(17) Install the accessory drive bracket and A/C compressor.
(18) Install the generator and drive belt. Tighten generator mounting bolt to 41 Nm (30 ft. lbs.) torque.
(19) Install the air cleaner.
(20) Fill cooling system.
(21) Connect the negative cable to the battery.

Seals and Gaskets, Engine > < Additional Information|Page 1651