RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Blower Motor: Service and Repair
Rear Blower Motor
The rear blower motor is used only on models with he optional rear heater-A/C unit. The blower motor can be removed without removing the rear
heater-A/C unit from the vehicle.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cover from the rear heater-A/C unit.
3. Remove the vertical duct from the rear heater-A/C unit.
4. Remove the horizontal duct from the rear heater-A/C unit.
5. Remove the upper housing from the rear heater-A/C unit.
Rear Blower Motor Remove/Install
6. Remove the three screws that secure the blower motor mounting plate to the rear heater-A/C unit upper housing.
7. Remove the blower motor assembly from the rear heater-A/C unit upper housing.
Blower Motor Wheel Remove/Install
8. Remove the retainer clip from the hub of the blower wheel.
9. Remove the wheel from the blower motor shaft.
INSTALLATION
1. Press the hub of the blower wheel onto the blower motor shaft. Be sure the flat on the blower motor shaft is indexed to the flat on the inside of the