RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Marker Lamp Bulb: Service and Repair
Sidemarker and Turn Signal Bulb Replacement
REMOVAL
1. Raise hood and position support rod.
2. Remove the screws from the sidemarker and turn signal lamp housing and pull out to disengage the outboard pin clip to remove the housing.
Sidemarker and Turn Signal Bulb Removal
3. To remove the bulb, twist the it 1/4 turn counter-clockwise and remove it from the housing.
4. Pull the bulb straight out of the socket.
INSTALLATION
1. Push the replacement bulb into the socket.
2. Position the bulb in the housing and twist it 1/4 turn clockwise.
3. Align the outboard pin clip and position the housing on the vehicle. Install the screws.
