RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
3. Adjust the wheel toe position by rotating the tie rod adjustment sleeve.
4. Position the adjustment sleeve clamps so the ends are not located at the sleeve slot.
Tighten the tie rod sleeve clamps to:
-
LD: 23 Nm (17 ft. lbs.)
-
HD: 35 Nm (26 ft. lbs.)
Ensure the clamp bolts are located at the underside of the sleeve.
5. Verify camber, caster and toe position.
Wheel Alignment Specifications Chart
NOTE: Alignment specifications are in degrees.
