RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Fuel Level Sensor: Service and Repair
Fig.25 Fuel Gauge Sending Unit Location (Typical Module)
The fuel level sensor (fuel gauge sending unit) and float assembly is located on the side of fuel pump module. The fuel pump module is located inside of
fuel tank.
REMOVAL
1. Remove fuel tank. Refer to Fuel Tank Removal/Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/installation.
3. Unplug 4-way electrical connector.
4. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.
Fig.26 Fuel Gauge Sending Unit Lock Tab/Tracks
