RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Fuel Injector: Service and Repair
WARNING: THE FUEL SYSTEM IS UNDER A CONSTANT PRESSURE (EVEN WITH THE ENGINE TURNED OFF). BEFORE
SERVICING THE FUEL INJECTOR(S), THE FUEL SYSTEM PRESSURE MUST BE RELEASED.
To release fuel pressure, refer to the Fuel System Pressure Release Procedure.
To remove one or more fuel injectors, the fuel rail assembly must be removed from engine.
REMOVAL
1. Remove engine cover.
2. Remove air cleaner assembly.
3. Remove fuel injector rail assembly. Refer to Fuel Injector Rail removal.
Fig.30 Fuel Injector Mounting (Typical)
Fig.31 Injector Retaining Clips (Typical Injector)
4. Remove the clip(s) retaining the injector(s) to fuel rail (Fig. 30) or (Fig. 31).
5. Remove injector(s) from fuel rail.
INSTALLATION
