dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC's P0201 - P0208 Set|Page 3450 > < Engine Controls - Engine Spark Knock|Page 3445
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - MIL ON/DTC's P0201 - P0208 Set

NUMBER: 18-017-02

GROUP: Vehicle Performance

DATE: June 10, 2002

THIS BULLETIN IS BEING PROVIDED IN ADVANCE. THE MDS2 MUST BE OPERATING WITH CIS CD2III OR HIGHER, AVAILABLE
JULY 8, 2002.

SUBJECT:
Flash: MIL Illumination For Injector Circuit Fault

OVERVIEW:

This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software (98Cal12D, 99Cal19D,
00Cal17A).

MODELS:

1998-1999

(AB)

Ram Van

1998-1999

(AN)

Dakota

1998-2000

(DN)

Durango

NOTE

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 5.2L ENGINE AND HAVE A CALIBRATION PRIOR TO THOSE LISTED
ABOVE.

SYMPTOM/CONDITION:

The Malfunction Indicator Lamp (MIL) may illuminate intermittently. The Diagnostic Trouble Codes (DTC) associated with this condition are P0201
through P0208 (Injector Circuit Fault.)

DIAGNOSIS:

If one or more of the Diagnostic Trouble Codes (DTC P0201 through P0208) are present, perform the Repair Procedure.

PARTS REQUIRED:

EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

1.

Connect a battery charger and set as close to a 14 volts charge as possible.

Engine Controls - MIL ON/DTC's P0201 - P0208 Set|Page 3450 > < Engine Controls - Engine Spark Knock|Page 3445