RAM 2500 Van V8-5.2L VIN Y (1998)
Sliding Side Door Power Lock Motor Remove/Install
Single Rear Door Lock Motor Remove/Install
3. Reach through the access hole in the inner door panel to disengage the connecting link from the power lock motor.
4. Disengage the power lock motor wire harness connector retainer from its mounting hole and unplug the connector.
5. Remove the screws that secure the power lock motor mounting bracket to the inner door panel.
6. Remove the power lock motor from the door.
7. Reverse the removal procedures to install. Tighten the mounting screws to 10 N.m (90 in. lbs.).
