RAM 2500 Van V8-5.2L VIN Y (1998)
6. Seat dust boot in caliper with Handle C-4171 or equivalent and Installer:
-
HD 56 mm caliper: Installer C-4340
-
LD 54 mm caliper: Installer C-3716-A
7. Install the second piston and dust boot.
8. Lubricate caliper mounting bolt bushings, boot seals and bores with silicone grease.
9. Install the boot seals into the caliper seal bores and center the seals in the bores.
10. Install mounting bolt bushings into the boot seals and insure seal lip is engaged into the bushing groves at either end of the bushing.
11. Install caliper bleed screw.
