dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Lock Cylinder Switch > < Door Sensor/Switch (For Alarm)|Diagrams|Page 356
Page 1
background image

Door Sensor/Switch (For Alarm): Service and Repair

REMOVAL

Front Door
The front door ajar switches are integral to the front door latch unit. If a front door ajar switch is faulty or damaged, the entire front door latch unit
must be replaced.

Side Or Rear Door
1.

Disconnect and isolate the battery negative cable.

Door Ajar Switch Remove/Install - Side Or Rear Door

2.

Unscrew the door ajar switch from the pillar.

3.

Pull the door ajar switch away from the pillar far enough to access and unplug the two wire harness connectors from the switch.

4.

Remove the door ajar switch from the vehicle.

5.

Reverse the removal procedures to install. Tighten the switch to 5.6 N.m (50 in. lbs.).

Lock Cylinder Switch > < Door Sensor/Switch (For Alarm)|Diagrams|Page 356