RAM 2500 Van V8-5.2L VIN Y (1998)
Ignition Switch Mounting Screws
f.
Remove 2 ignition switch mounting screws (size T4) and separate switch at steering column.
Separating 48-Way Connectors At Lower Part Of Column
g. Separate steering column 48-way electrical connectors by removing one fastener (bolt). The 48-way connector is located near lower part of
steering column. This 48-way connector contains 48 different pin-outs including 3 different connectors: a 17-way for the multi-function switch;
a 13-way for the multi-function switch; and an 18-way for the ignition switch.
Separating 48-Way Connectors At Lower Part Of Column
h. Separate 17-way multi-function switch connector from 18-way ignition switch connector.
