RAM 2500 Van V8-5.2L VIN Y (1998)
Suspension Strut / Shock Absorber: Service and Repair
Front
REMOVAL
Front Shock Absorber
1. Remove nut and bushing from the shock absorber upper stud.
2. Raise vehicle, remove the lower attaching bolts and remove shock absorber.
INSTALLATION
1. Install the lower retainer and bushing on the upper stud. Insert the shock absorber stud through the frame hole.
2. Install the lower shock bolts and tighten to 23 Nm (17 ft. lbs.).
3. Install the upper grommet and retainer on the shock absorber stud. Install the nut and tighten to 34 Nm (25 ft. lbs.).
