RAM 2500 Van V8-5.2L VIN Y (1998)
Securing Detent Ball And Spring With Retainer Tool
3. Secure detent ball and spring in housing with retainer tool 6583.
Removing Manual And Throttle Levers
4. Remove manual shaft E-clip and washer.
5. Pull manual shaft and park rod assembly upward out of valve body and off throttle lever.
6. Remove Retainer Tool 6583. Then remove and retain detent ball and spring.
7. Remove throttle lever.
Clutch Module And Connecting Tube Removal/Installation
8. Remove park rod E-clip and separate rod from manual lever.
