RAM 2500 Van V8-5.9L VIN Z (1997)
Speaker: Service and Repair
Rear Panel
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear passenger seat.
3. Remove the garnish moldings.
4. Using a wide flat-bladed tool, gently pry the trim panel away from the body side panel around the perimeter to release the snap clip retainers.
5. Remove the body side trim panel.
Rear Panel Speakers Remove/Install
6. Remove the nuts that secure the speaker grille to the trim panel.
7. Remove the screws that secure the speaker to the body side panel.
8. Unplug the speaker wire harness connector.
9. Remove the speaker.
10. Reverse the removal procedures to install.
