RAM 2500 Van V8-5.9L VIN Z (1997)
INSTALLATION
1. Position the handle on the door outer panel with the handle rod inserted in the opening. Insert the handle studs into the panel holes.
2. Attach the handle rod to the latch.
3. Install the nuts that attach the handle to the door outer panel.
4. Install the door trim panel.
REAR CARGO DOOR OUTSIDE HANDLE/LATCH LEVER
1. Insert a 4 mm (5/32 in.) hex-wrench through the adjustment slot and into the latch release lever adjustment screw. Loosen the adjustment screw.
2. Depress and release the door outside handle latch release button several times.
3. Tighten the adjustment screw to 3 N.m (30 in. lbs.) torque.
4. Test the door handle for correct operation.
