RAM 2500 Van V8-5.9L VIN Z (1997)
5.
Remove primary shoe-to-secondary shoe spring (Figure 1).
6.
Remove the brake shoe hold-down springs (Figure 2).
7.
Remove the primary shoe-to-secondary shoe lower spring and adjuster assembly.
8.
Remove the brake shoes.
9.
Disconnect the brake wheel cylinder brake line.
10.
Remove the brake wheel cylinder attaching bolts and remove the wheel cylinder from the brake support plate.
11.
Apply a bead of Mopar Gen II Silicone Rubber Adhesive Sealant p/n 04883971 around the cylinder mounting surface of the support plate.
12.
Install the new wheel cylinder (see Parts Required section) onto the brake support plate.
