dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Drive Belts, Mounts, Brackets and Accessories > < Valve, Intake/Exhaust|Removal and Installation
Page 1
background image

Valve: Service and Repair
Refacing Valves and Valve Seats

NOTE:  The intake and exhaust valves have a 43-1/4° to 43-3/4° face angle and a 44-1/4° to 44-3/4° seat angle.

Inspect the remaining margin after the valves are refaced. Valves with less than 1.190 mm (0.047 inch) margin should be discarded.

Drive Belts, Mounts, Brackets and Accessories > < Valve, Intake/Exhaust|Removal and Installation