RAM 2500 Van V8-5.9L VIN Z (1997)
4.
Remove the two screws that secure the resistor to the inboard side of the heater housing near the radiator support panel and remove the resistor.
5.
Install the new resistor (p/n 05003333AA) into the heater housing and secure it with two mounting screws.
6.
Plug the harness connector onto the resistor.
7.
Connect the battery negative cable.
8.
Program all radio presets recorded in step one and reset the clock.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
24-55-10-92
0.2 Hrs.
FAILURE CODE:
P8 - New Part
