RAM 2500 Van V8-5.9L VIN Z (1997)
Blower Motor Switch: Service and Repair
Fig 29 Heater-A/C Control Bezel And Accessories Removal/Installation
FRONT
1. Remove the heater-A/C controls.
2. Unplug the wire harness connector from the back of the front blower motor switch.
3. Remove the screws that secure the top and bottom of the switch to the back of the heater-A/C control unit, and remove the blower motor switch.
4. Reverse the removal procedures to install.
REAR
1. Remove the heater-A/C control bezel.
2. Unplug the wire harness connector from the back of the rear blower motor switch.
3. Remove the screws that secure the switch to the heater-A/C control bezel, and remove the blower motor switch.
4. Reverse the removal procedures to install.
