RAM 2500 Van V8-5.9L VIN Z (1997)
Marker Lamp Bulb: Service and Repair
Side Marker Lamp Bulb
REMOVAL
1
Raise hood and position support rod.
2. Remove the screws from the sidemarker and turn signal lamp housing and pull out to disengage the outboard pin clip to remove the housing.
Side Marker And Turn Signal Bulb Removal
3. To remove the bulb, twist the it 1/4 turn counter clock-wise and remove it from the housing.
4. Pull the bulb straight out of the socket.
INSTALLATION
1. Push the replacement bulb into the socket.
2. Position the bulb in the housing and twist it 1/4 turn clock-wise.
3. Align the outboard pin clip and position the housing on the vehicle. Install the screws.