dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Combination Switch|Service and Repair|Page 7225 > < Circuit Operation|Page 7221
Page 1
background image

Combination Switch: Service and Repair

REMOVAL

WARNING:  ON VEHICLES EQUIPPED WITH AN AIR BAG, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING STEERING WHEEL OR STEERING COLUMN COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE
PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the tilt steering column lever, if equipped.

Knee Blocker Remove/Install

3. Remove the knee blocker.

Steering Column Shrouds Remove/Install - Typical

4. Remove both the upper and lower shrouds from the steering column.
5. Remove the lower fixed column shroud.
6. Loosen the steering column upper bracket nuts. Do not remove the nuts.

Combination Switch|Service and Repair|Page 7225 > < Circuit Operation|Page 7221